| dpilot83 - 4/11/2016 10:20
Your DJI app most likely updated the firmware in your remote control. Now your Phantom cannot communicate with the remote because it's behind in firmware. You will need to load the current firmware into the root directory of a micro sd card, put the card into the phantom and turn it on. Make sure you have at least 50% battery when you start that process. It can take as long as a half an hour for it to finish updating. When you're done you should be able to connect again.
How is that done ? Is there is link that explains how to do it along with the firmware ?
Edited by Racer57 4/11/2016 11:59
|
RC Signal lost
