|
| 1st - remove both pins or bolts oat the rear of the loader frame under the cab doors
2nd - lower the 3pt hitch (if installed)
3rd - shift gearbox to 1st, then lower the loader and slowly back up
Sometimes you will have to work the hyds for the bucket & loader as well as shake the steering wheel back & forth.
May need a helper to pry it out of the pockets with a big bar
4th - continue to work the hyds & back up until the vertical pins on the underside of the sides of the C-frame contact the horizontal pins welded to the side of the tractor frame , at the very rear, beside the work lights
5th - Now, continue to back up very slowly, and at the same time, pull the hyd lever as if you were slowly lifting the loader.
6th - soon the loader will be standing on its own, back up a bit more & unhook the hoses
Once you do this a couple of times, it is a piece of cake
| |
|