|
northeast ohio | Your photo is the switch to hitch cable with DTM-4 on switch end and DT-4 on the hitch. From there they are all DT-4 pin plugs align with dual power to the RSCM module. The module will have a 75526 on the input side and 80540 harness with adapters to the valves and flow meter. If you have a 75503 or 88644 on the module then that’s a totally different scenario.
Part number for the extension with the four CAN wires and two pair of heavy power is 75528-xx. Xx is the length. If you are ok with used then reach out via this listing. https://talk.newagtalk.com/classifieds/Classified.aspx?id=203073 Have lengths from 5 to maybe 40 in various conditions.
Edited by neo_ag 2/6/2024 18:31
| |
|