| This is probably a dumb question, but I can’t seem to find anything regarding it in a setup manual… Is there any way to remove the bottom banner of the Direct Command with the pressure gauge and nozzle setup/pressure specs? I’m running a liquid fertilizer bar so I don’t see the need for this info..?
 (005B0CAF-B9B2-4DB4-AAFF-9CB47937AF18 (full).jpeg)
Attachments
----------------
 005B0CAF-B9B2-4DB4-AAFF-9CB47937AF18 (full).jpeg (180KB - 25 downloads)
|
L2 Direct Command run screen
