Posted 3/16/2024 08:51 (#10667020 - in reply to #10665212) Subject: RE: L2 Direct Command run screen
Delta
deere dr. - 3/14/2024 18:53
This is probably a dumb question, but I can’t seem to find anything regarding it in a setup manual… Is there any way to remove the bottom banner of the Direct Command with the pressure gauge and nozzle setup/pressure specs? I’m running a liquid fertilizer bar so I don’t see the need for this info..?
You can’t remove it, but if you touch anywhere in the middle of the screen, all the menus will collapse away. Then press the mapping icon to bring it back.
L2 Direct Command run screen
