|
| So first day planting with planter upgrades, delta force and vdrives with gen 3 monitor. Using trimble fmx 1000 for rtk auto steer and for gps for 2020. I made my boundary, chose simulated headlands at 60'. When i crossed the boundary, the coverage map stopped and started perfectly at boundary for the endrows. I checked seed drop and it was lagging 90 inches going into field from boundary and planting 90 inch too much after leaving field into the boundary. So i put a 90 inch adjustment to planting lead and lag. Checked it, and was doing perfect. But now my logging shows it planting to early and shutting off before it reaches boundary, BUT the seed is properly spaced according to boundary line. What is wrong? So in short- The seed is dropping right, but the logging is not. Any help?
Edit to add- The 3 passes in the top picture the start evenly was before i added the 90 inch start and stop distance. The other picture shows hows it looks when the seeds are dropping properly by boundary.
Edited by OLDHENRY 3/20/2024 21:39
(20240320_124713 (full).jpg)
(20240320_200301 (full).jpg)
Attachments ---------------- 20240320_124713 (full).jpg (133KB - 24 downloads) 20240320_200301 (full).jpg (83KB - 19 downloads)
| |
|