Near Intersection of I-35 & I-90 Southern Mn. | I would think so since that is the case with other modules. The InCommand update includes updates for the display itself and updates for all other modules. When you choose a configuration that utilizes modules, the system will check to see if they are at the current level. If not it will ask for your permission to update them. So you will want to indicate yes to that question.
In the early days, the updates for the display and modules were separate activities. The operator might update his display and not be aware that he should update his modules also which lead to much confusion.
Yes, except for the different connector on the display end, the other connections on the planter would be the same as what the older drawing is showing. You will need to perform the relearn the sensor position routine as indicated in the instructions you are getting. |
Ag Leader InCommand 1200 and Kinze 3500 Planter (KPM III to PMM)
