|
NW MN | If you have no Ag Leader on the planter at this point, you can also just stick the PMM in the cab and plug it into the Weatherpack connector that goes to the KPM (assuming the III is the same as the II that I am familiar with).
Usually requires making up a weather pack gender changer adapter as the PMM and factory Kinze cab harness have the same ends. Then use a CAN Y and terminator and plug directly into the CAN A connector on the display cable (round 4-pin with metal clip).
Will save you quite a bit of money versus buying implement cables. | |
|
Ag Leader InCommand 1200 and Kinze 3500 Planter (KPM III to PMM)
