|
Ecsd | DO NOT DO THAT!!!
Then you are going to fight it the whole year. In the sprayer, combine, and if you striptill again. Aren’t you better off just splitting the difference. My striptiller has a shank bent 2” out on the outside row. Are you really going to make the let’s say 30’ implement 2” bigger just for the tape measure. Tell me now how you do when you pull into the field with the 100’ boom sprayer. Get out the calculator and go 100’/30’=3.33333x2”=6.6666” more than 100’. That does not sound like a good way to do it. If the custom operator comes in to spray and doesn’t nudge the line……
The way I do it.
I would just set a 1” offset. Then instead of having a 26” guess row on one side and dead on 30” the other side it would be 28” and 32”. You will not see it nor will you have to do and remember to do all that math.
If you did custom strip tilling and made odd sized implements you would only have a job for one year. Guys spending 1500 on rtk only to have to nudge several times EVERY ROUND!!!!!!!!!!!!!!!!
Edited by bordercolliie1 4/3/2024 09:36
| |
|