Near Intersection of I-35 & I-90 Southern Mn. | The error message is coming from the PMM which I am not familiar with.
The suggestion about checking the high current power/ground is still a good one. I run several modules on my planter but do use both High Current Pairs at the hitch connection to provide adequate power to my clutches and other devices. With 31 clutches, I would think it a good idea to be using both pairs also. If you have a "square" end without point rows, all 31 of your clutches will be cycling at the same time.
I am running 24 of the Ag Leader Sure Vac clutches as well as spray valves and a Liquid Module without a problem of this type. However I am using a Seed Tube Monitoring Module rather than the PMM that you are using. I have not seen an error message of that type. |
Ag leader seed monitoring voltage warning.
