Posted 2/20/2008 20:12 (#315041 - in reply to #315001) Subject: Re: 1000 RPM to 540 on large frame JD tractors
Mid-East Nebraska
With a Quad Range you will have to make a shaft from the back to the clutch housing, be careful when pulling the shaft out so that the front gear stays forward, the power shift will have to be split and the clutch housing taken off, the pto shaft has a front gear that is bolted and splined on the front of the shaft. It still will be 1000 RPM
1000 RPM to 540 on large frame JD tractors
