Viewing a thread - Fitting a T to a 6” sub main.

Forums | Classifieds (1) | Skins | Language

You are logged in as a guest. ( logon | register )

Fitting a T to a 6” sub main.	View previous thread :: View next thread
Forums List -> AgTalk Cafe	Message format

Cliff SEIA

Posted 6/8/2023 08:50 (#10261558 - in reply to #10261409)
Subject: RE: Fitting a T to a 6” sub main.

We use taps into 6" mains for 3 or 4" lines. I rarely tape a T but always try to cut 1.5-2" less pipe out than needed so the ends are tight when stuffed back in.

Fitting a T to a 6” sub main. - TooDeep : 6/8/2023 07:03
- RE: Fitting a T to a 6” sub main. - blden : 6/8/2023 07:16
  - RE: Fitting a T to a 6” sub main. - jdironman : 6/8/2023 08:04
    - RE: Fitting a T to a 6” sub main. - alebrenn : 6/8/2023 14:37
- RE: Fitting a T to a 6” sub main. - mac4440 : 6/8/2023 07:57
- RE: Fitting a T to a 6” sub main. - Cliff SEIA : 6/8/2023 08:50
  - RE: Fitting a T to a 6” sub main. - PracticalAgLLC : 6/8/2023 09:58
  - RE: Fitting a T to a 6” sub main. - TooDeep : 6/8/2023 10:57
  - RE: Fitting a T to a 6” sub main. - John In Ontario : 6/8/2023 22:07
    - RE: Fitting a T to a 6” sub main. - JDpastor : 6/9/2023 12:33
      - RE: Fitting a T to a 6” sub main. - TooDeep : 6/9/2023 21:27
        
        RE: Fitting a T to a 6” sub main. - JDpastor : 6/9/2023 23:27
- RE: Fitting a T to a 6” sub main. - gpsdude : 6/8/2023 14:45
  - RE: Fitting a T to a 6” sub main. - whiterock91 : 6/8/2023 16:50

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)