AgTalk Home
Search
Forums
|
Classifieds (76)
|
Skins
|
Language
You are logged in as a guest. (
logon
|
register
)
Fitting a T to a 6” sub main.
View previous thread
::
View next thread
Forums List
->
AgTalk Cafe
Message format
Flat
Threaded
Nested
TooDeep
Posted
6/9/2023 21:27 (#10263746 - in reply to #10263105)
Subject:
RE: Fitting a T to a 6” sub main.
NE ND
Switched from Ts into a 6” to taps into an 8”.
It feels like a day off for me in the start hole.
Thanks again to all for the advice.
Fitting a T to a 6” sub main.
-
TooDeep
: 6/8/2023 07:03
RE: Fitting a T to a 6” sub main.
-
blden
: 6/8/2023 07:16
RE: Fitting a T to a 6” sub main.
-
jdironman
: 6/8/2023 08:04
RE: Fitting a T to a 6” sub main.
-
alebrenn
: 6/8/2023 14:37
RE: Fitting a T to a 6” sub main.
-
mac4440
: 6/8/2023 07:57
RE: Fitting a T to a 6” sub main.
-
Cliff SEIA
: 6/8/2023 08:50
RE: Fitting a T to a 6” sub main.
-
PracticalAgLLC
: 6/8/2023 09:58
RE: Fitting a T to a 6” sub main.
-
TooDeep
: 6/8/2023 10:57
RE: Fitting a T to a 6” sub main.
-
John In Ontario
: 6/8/2023 22:07
RE: Fitting a T to a 6” sub main.
-
JDpastor
: 6/9/2023 12:33
RE: Fitting a T to a 6” sub main.
-
TooDeep
: 6/9/2023 21:27
RE: Fitting a T to a 6” sub main.
-
JDpastor
: 6/9/2023 23:27
RE: Fitting a T to a 6” sub main.
-
gpsdude
: 6/8/2023 14:45
RE: Fitting a T to a 6” sub main.
-
whiterock91
: 6/8/2023 16:50
Jump to forum :
Forums List
----------------------
+ Machinery Talk
+ Where Can I find?????
+ Crop Talk
+ Stock Talk
+ AgTalk Cafe
+ Kitchen Table
+ Precision Talk
+ Drone Talk
+ Computer Talk
+ Market Talk
+ Test Forum
+ FAQ & Support
Search this forum
Printer friendly version
E-mail a link to this thread
(
Delete cookies
)
Fitting a T to a 6” sub main.
