Posted 6/9/2023 12:33 (#10263105 - in reply to #10262401) Subject: RE: Fitting a T to a 6” sub main.
I have my sons cut the tile extra long so that it has to compress to go into the fittings, but then I warn them to make sure that it is not so long that it bows up and creates a hump. Your advice to just make it an extra inch is good. Much more than that can cause a hump that causes it to go off grade. Little details like that can make a big difference. Keep up the good work.
Fitting a T to a 6” sub main.
