NW Iowa | If trying to run Clean Sweeps on manual set point control is there any way to control the Precision AirForce compressor without using a 20/20 SeedSense monitor?? We have a 1770NT16R30 CCS set up with all Ag Leader SureSpeed/SureForce that we are now adding new clean sweep cylinders to. We already had a used Precision Planting 20/20 AirForce 10 gallon compressor that we are trying to use but it is wired up to run through the AirForce control system. I have the hydraulics plumbed into SCV 1 frame lift and CCS fan run on constant, I can't get the compressor to operate. Since we do not have a 20/20 seedsense monitor I am hoping we can somehow bypass the AirForce controller/wiring and just run the clean sweeps with the manual control box in the cab. Does anyone know if this is possible without the 20/20 monitor and if so how would I go about rewiring the compressor to work manually? Any advice is appreciated, thank you! |