|
| Have an F9P base station set up running RTKBase and can confirm it provides an RTK Fix to my drone. Testing out an InCommand 1200 display that will be installed in the sprayer though, I can connect to the NTRIP server no problem but it's not receiving any corrections. Base station page on the InCommand just shows a bunch of zero's/NA. 25-35 satellites are in view at any time, and I'm literally 50 feet from my base station antenna.
NTRIP server is via RTK2Go.com. Broadcasting messages 1004, 1005(10), 1006, 1008(10), 1012, 1019, 1020, 1033(10), 1042, 1045, 1046, 1077, 1087, 1097, 1107, 1127, and 1230 (the defaults in RTKBase). I'm going to keep the location details to myself but the messages blurb from the RTK2Go website are in the screengrab below.
Anybody here running the same setup and able to advise how to get this working?
Edited by chazawalla 4/10/2024 20:04
 (snip (full).png)
Attachments
----------------
 snip (full).png (38KB - 12 downloads)
| |
|
Anyone using an F9P RTK base station with In Command 1200?
