|
| Oh good to know! I'll have to try that. I just installed RTKBase on a Raspberry Pi and its really that simple. I'll need to look into this high precision option, if its just a specific NMEA message that should be easy enough to add to my messages.
These are the options I have with RTKBase. I previously had it running on an ESP32 (from the SparkFun guides) but that would freeze up on me after about 24 hours while RTKBase has been running four days no issue. Hopefully can get it to work but I'm not against going back to the Sparkfun stuff.
(rtkbase (full).png)
Attachments ---------------- rtkbase (full).png (46KB - 11 downloads)
| |
|