| If you have a Raspberry Pi 4 kicking around maybe try RTKBase (towards the bottom here), you basically install that to the pi, connect the F9P via USB, navigate your browser to the Pi IP address and then it just works. Update to the latest version in the web UI, enter your NTRIP details there, etc. Plugging in that second cable and I've had no problem getting a fix all day using RTK2Go and Emlid both, with default settings on the base station.
Worst case it doesn't work and you can move your F9P back to the original setup |
Anyone using an F9P RTK base station with In Command 1200?
