|
| Good Morning,
I occasionally bend the push pin on the top of these push button switches on my planter. I have one on an ag leader system and one on the precision planting system. When I bend one all I need to do is swap out the rubber screw on cap with a new one and the switch continues to work fine. I’ve bent 2 this year and normally about 1 per year. I can’t see anything on the planter where it engages the switch causing the bend.
New switches are like $85-$135. Does anyone know where I can buy just the rubber screw on cap with the push rod? Surely it’s like a $.50 part that I’m having to spend $100 to replace. Anyone have a link on Amazon or EBay to replacements? Caps or whole switches
Edited by Buckheart2 4/18/2024 07:14
 (IMG_1407 (full).jpeg)
 (IMG_1404 (full).jpeg)
 (IMG_1402 (full).jpeg)
 (IMG_1398 (full).jpeg)
 (IMG_1405 (full).jpeg)
 (IMG_1403 (full).jpeg)
Attachments
----------------
 IMG_1407 (full).jpeg (91KB - 27 downloads)
IMG_1404 (full).jpeg (85KB - 21 downloads)
IMG_1402 (full).jpeg (181KB - 20 downloads)
IMG_1398 (full).jpeg (96KB - 17 downloads)
IMG_1405 (full).jpeg (157KB - 20 downloads)
IMG_1403 (full).jpeg (82KB - 18 downloads)
| |
|
Push button lift switch for Ag Leader/Precision Planting
