|
| I do the wireless camera also. I use it to watch the gauge. It's just a cheap one from sam's club. I made a large u shaped mount out of flat steel and put two donut magnets on the feet. I take it off of the tank and mount it on the hitch. When I get in the cab I look where the tank hitch is on the screen, then I back up to the next tank and line up the hitch in the same position. Usually the pullout is enough that I don't have to move it again.
The camera is focused so that the ground is clear but the gauge is a little blury. I only need to see when the gauge stops moving. I use a reuseable zip tie to make sure it doesn't fall off. | |
|