KRK - 2/20/2008 17:01 If I was going to do it. I would replace the existing valves with Tee Jet 344BEC-24-C. Install a new Raven console cable & product cable. Then Ez Boom would plug in and everything would work. Rinex doesn't show your sprayer. I think the newer patriot sprayers use banjo ball valves with a standard wiring. Thanks again for the input. Am I also going to have to replace the switches with regular ones? From what I can tell the console cable exits the back of the Raven 460 but I'm not sure where the product cable branches off to...tomorrow morning I'm going to go examine the wiring harness as thoroughly as I can and try to figure some of this out.
|