|
Somerville, Indiana | CaseIH partsman told me he had some Pioneer type male fittings that were longer in the area between the oring flange and the threaded upset of the fitting...That lets the equal diameter part of the fitting come past the seal ring of the female fitting in the block.
I had a lot of problems with this when I had a sore shoulder, couldn't push in hard enough for it to hold...Got to looking and saw the o'ring seal of the female block was riding up on the threaded upset area...I was raising LL34 with the partsman because surely they could design a coupling that a guy could use without changing over to Pioneer...That is what he came up with and it worked...Now all the male fittings from CaseIH are longer. | |
|
Another update on Magnum blowing hoses, and a query
