|
NE Indiana | Did your field you were testing this out on have a boundary on the other side of the dooryard? There is a setting to let the monitor know if it needs to turn on an interior boundary. For example if you had a field that had a waterway going through the middle, if this is a rough or deep waterway that you don't want to drive through you set it to turn before it got there. On the flip side if its one that you want to drive through you can set the Turnpath to turn at the last boundary it sees. I don't know if you have it set to the last boundary if it will still show a turn line (like the blue one you had) at that first boundary line but not initiate the turn. | |
|
Ag Leader TurnPath
