|
south texas | I have a similar setup on the planter side. Used a 4840, 4960, and now 8295r. All were plumbed with 3pt and lift on same circuit. I dont put the top pin in the planter so I can use the quick hitch as a stop for setting the level of the planter. As previous poster said this can cause issues when crossing ditches but u can lower planter to male it work. If u don't keep pressure off top link it will break it or break the diff housing. Just have to watch when crossing ditches ect.
I have to pin my wings or they will float up and leave center lower. We always have to run down pressure in heavy clay so maybe yours is different. I didn't try this year pressing down with the 8295r on the stack cylinders.
(FB_IMG_1652105014455 (full).jpg)
(20140312_074256 (full).jpg)
(20140312_074228 (full).jpg)
Attachments ---------------- FB_IMG_1652105014455 (full).jpg (87KB - 4 downloads) 20140312_074256 (full).jpg (132KB - 6 downloads) 20140312_074228 (full).jpg (122KB - 3 downloads)
| |
|