|
Hillsboro, AL | It depends upon your definition of "standardizes". Probably few if any default to CMR in their default autosteer configuration. But many RTK GPS receivers have CMR as an option. The key is to know how to set the receiver to that option and to keep any auto configurations for changing that option. Some auto steer system auto configure the receiver on power up and there is no option to turn that off in the UI. It takes a registry hack to do it. And your are going to get very little help from support on how to do that or how to configure the receiver to run on CMR. It can be done on most systems, (I am not sure about the JD RTK) but you have to have some knowledge to do it.
| |
|