Dallas Center IA 515-720-2463 | Another thing or two
I much prefer the R2H button on the controller vs the icon on the screen.
Just give the button a good firm push.
And almost always use R2H after the flights work is done, with a long distance.
Feel it will come home better on it's own, than I can drive it.
My high R2H height does have a problem. Takes more juice.
The thing is always computing how much battery it will take to get back to the home point.
When this R2H requirement goes to less than the remaining battery - It goes into auto R2H for Weak Battery.
So my useful battery time is reduced a bit.
If you are a good distance out and get a 'Weak Signal' warning - Do not panic, not all is lost.
First a good chance the signal will improve.
Try increasing the elevation. Good chance it will go up. More height = better signal .
Let it go into auto R2H for weak signal. Then after the signal improves, cancel the R2H and start flying it yourself again.
|
Couple of DJI P3A questions
