Middlesex County, Ontario | havin’funfarming - 8/18/2023 10:59
Edit to add: I forgot about the small circuit board to solder onto the back of the connection instead. That likely would be a very good idea and if you think I should do that I will.
If you want to do it, here's a gerber file zip attached to this post, they're about $5 for 5 at JLCPCB (plain board without connector).
Edited by WildBuckwheat 8/19/2023 07:39
(breakout1 (full).JPG)
(breakout2 (full).JPG)
Attachments ---------------- breakout1 (full).JPG (47KB - 62 downloads) breakout2 (full).JPG (70KB - 57 downloads) Gerber_PCB_Ampseal Breakout Board_2023-08-19.zip (10KB - 47 downloads)
|