| WildBuckwheat - 3/12/2024 15:03
Any luck with your UDP section control? I've been playing around with an ESP32 at my desk for Wifi section control and am able to turn some LEDs on and off, a fair start.
I have made some progress. I had the common red nano Ethernet shield and it wasn’t working. I ordered another enc28j60 Ethernet connector and have it wired up on a bread board and it is working as it should. I found a tutorial the showed a different brand of nano shield and all the pins line up with the pins set by the section control sketch. I have that shield on order, either that shield will work, or I will permanently wire the wired Ethernet connector to a nano development board. Thanks for checking. I am installing a tablet for AgopenGps and a Raven 460 in the sprayer as I type this.
 (IMG_3688 (full).jpeg)
 (IMG_3710 (full).jpeg)
Attachments
----------------
 IMG_3688 (full).jpeg (137KB - 16 downloads)
IMG_3710 (full).jpeg (117KB - 17 downloads)
|
AgOpenGPS U turn
