|
Southeast Illinois | The only reason that I chose pin 16 to send 12V to the flowmeter is because the 37 pin connector only has pin 26 (which I believe is for a 12V flowmeter) instead of pin 25 (which I believe is for a 5V flowmeter).
Would you happen to know the Ag Leader part number for the harness you mentioned (4 section, flowmeter, PWM, and pressure sensor)? I'd like to use the harness I already have, but yes splicing them together probably shouldn't be a permanent solution. | |
|
37 pin John Deere harness to 16 pin Raven harness
