Near Intersection of I-35 & I-90 Southern Mn. | Well yes and no. The 3 pin connector I am referring to is the 3 pin connector that Raven uses with their flow meter. My comments are correct for a Raven flow meter which could apply to others reading these posts.
I was not referring to the radar connector you have circled. I was referring to the flow meter connection shown in the lower right portion of your last drawing by the drawing of a Raven flow meter. It would still be a good idea to check for power there but do as you wish.
I'm curious as to why you are using a Magmeter considering that they are quite expensive.
Thanks for all your help. Good Bye.
Edited by tedbear 3/27/2024 08:30
|
37 pin John Deere harness to 16 pin Raven harness
