Hagen Brothers farms,Goodrich ND | dvswia - 2/19/2008 18:34
next time you get on it, try this.. as you come to the end of your pass, turn toward the pass you just made and continue this turn till you make a complete figure 8 then see how far you get with your guidance. You will lose your next pass because the thing now thinks you want to go the other way. I know it does this.
Wrong, it used to be that way with the old 3.10 firmware, but that problem is gone with the 4.11 firmware.
With the 4.11 firmware you can not confuse the EZGuide plus like that any more, It does care what direction you turn or what contortions you need to make to get out of that corner, it will now go right back to the next line or any previous line you may want without fail.
You must not have used one since the last couple firmware updates were installed. |