Posted 3/18/2024 15:42 (#10670332 - in reply to #10670285) Subject: RE: sprayer rate control with some boom valves off, section control
Near Intersection of I-35 & I-90 Southern Mn.
cheeseman - 3/18/2024 15:08
I checked and the boom section widths are all still correct. All sections act the same way.
I still go back to the idea that the controller believes that all boom sections are ON when they might not be. If the controller responded properly before the new device was added something has changed after it was added. Did you try my suggestion of running with the Original Boom sections OFF?
Possibly there is confusion in the wiring which is improperly back feeding all the booms when some are actually OFF. Are you using polarity reversing valves? They can make a simple situation confusing.
sprayer rate control with some boom valves off, section control
