Posted 3/18/2024 17:28 (#10670458 - in reply to #10670445) Subject: RE: I think I figured it out.
Here you go. I’m headed out to change oil on the wife’s Yukon. Let me know if you need more. I thought of one other thing to check. I tested the switches in hold, manual and auto. They acted the same in all three settings.
I just wanted to make sure I wasn’t seeing the top two as connected through the board instead of the switch, which could still be the case as I didn’t solder them, but I think the important thing to note is all three terminals show connection when on.
sprayer rate control with some boom valves off, section control
